How To Use Grip Installer Tool

Speedy Grip™ - Golf Grip Air Installation Tool Model: SG-1. Golf Grip Installer & Remover. This is truly the fastest and easiest way to remove and install grips, using the Speedy Grip™ air powered tool. The Speedy Grip™ Model SG-1 comes with two air nozzles, two different sizes to fit just about every grip. Most other similar. Ultimate Grip Installer Tool. Home » Ultimate Grip Installer Tool - Full Description. How to use the Ultimate Grip Installer Tool.

Features and Benefits A HeliCoil is a coiled-wire type of insert used to create internal screw threads to accommodate standard-sized fasteners. Some of the advantages of using a Helicoil include. • Thread Size Range A large range of available thread diameters allow for use in a variety of thread repair applications. According to published data, inserts are available as small as a #2 screw size, and as large as 1 1/2' diameter. Corresponding metric sizes are also available.

• Thread Type Selection Inserts are available in various thread type and pitch configurations including UNC, UNF, Metric Coarse Pitch and Fine Pitch, UNEF, UNS, and Pipe Thread. Each insert is offered in several different length options.

• Material Options Several material choices are available including Stainless Steel, Phosphor Bronze, Inconel X, Nitronic 60, and Titanium. A selection of finish coatings is also offered. How It Works: • As its name suggests, a HeliCoil is a helically coiled stainless steel wire that has a diamond-shaped cross-section.

The wire cross-section allows the external portion of the wire to screw into the receiving threads in the housing during installation. On the inner portion of the wire, the spacing between the coils of the insert form new conventional 60째 threads. The coils of the insert are compressed during installation as the insert is threaded into the housing. Like a coiled spring, the compressed windings of the installed insert attempt to expand against the walls of the threaded housing.

The resulting tension between the insert and the walls of the housing helps to retain the insert and keep it from unthreading. • The insert is provided with a drive tang that is used during installation to thread the insert into the receiving threads in the housing.

A special installation tool engages the tang of the insert to drive it into the housing. Once installed, the tang is no longer needed, and is removed.

• A small notch is formed into the insert that slightly reduces the coil cross sectional area at that location. When the time comes to remove the tang, the notch will cause it to break-off at that point. Installation Instructions: Installation Procedure: • Drill out the old threads using the drill size that is recommended on the thread repair kit packaging.

The shank of the tap also lists the recommended drill size. • Tap the hole using the Screw Thread Insert (STI) tap. • Install the insert using the installation tool. • For coarse-pitch threads, use the following procedure: • Slide the insert onto the installation tool. American Horror Story Season 2 Episode 3 Free Download more. • Rotate the insert until the tang contacts the driver notch of the installation tool.

• Screw the insert into the STI threaded hole to the proper depth using a tap handle to rotate the installation tool. • After the insert is seated to the proper depth, unthread the installation tool. • For fine-pitch threads, use the following procedure: • Use the pre-coil body supplied in the thread repair kit. The pre-coiler helps to compress the threads of the insert prior to installation in the housing.